Summary: Wood has always been the best and the most popular choice for making a door of the house. Owing to its basic characteristics of beauty and natural appearance, it has so far been the most preferred for manufacturing the front doors of the house. You can choose from the wide variety of wooden species ranging from oak, walnut, cherry, maple, pine, fir to mahogany for the customized door of your house.
By giving them a natural finish, you can make a beautiful front door for your house. But, since wood is naturally vulnerable to sun and moisture, you will have to ensure that the doors are finished properly to expand the life span of the front door.
Most manufacturers who produce wooden doors in bulk use manufactured wood which is coated over the surface of the doors. This not only ensures reduced cracking and warping, but also results in a less expensive and attractive door. But always remember that these coatings can be easily damaged if they are less than 1/16 inch in thickness.
You can get customized doors from nearby shops, which can build the door as per your specification or place your orders with manufacturers of customized doors, like Lamson-Taylor Custom Doors or IWP. IWP lets you choose from a wide range of styles which also include pre-finished wood colors,
As per Grant Taylor, owner of Lamson-Taylor, the company claims to design any door to complete satisfaction as per your specification. All you have to do is think of the design and forward it to them.
Insulation is incorporated in the structure of the door and the company uses high-technology methods which eliminate bending and cracking of the wood used. It also uses dual thickness methods where the materials are laminated together for building the rails and stiles.
Though they make the panels using the split construction method, they can comfortably insulate the cores. In comparison to the traditional door which have an insulation value of R-2, this company’s finished doors have been reported with an insulation value of R-5.
Pella Rolscreen and Simpson are other manufacturers who produce panels, rails and styles of two inch and over thick materials.
As solid wood doors are the most highly priced, the total cost of a front door entry system, made from solid wood can be anywhere between $2000 to $4000, though you can get a 3'0" by 6'8" six-panel pine door for approximately $600.
© Copyright www.diystuff.com
Top of Page
